Concrete Grinding
We grind concrete slabs back to a bare, open surface so coatings and new flooring bond. Old paint, glue and thinset come off, and the high spots come down.
Learn More
Commercial epoxy flooring gives a working building a floor that can take daily abuse. We coat concrete floors for shops, warehouses, service bays, stock rooms and retail spaces across Central Pennsylvania. Every job starts with grinding and prepping the slab, because a coating only lasts if it bonds.
SF Huling is based in Lock Haven and works the corridor from State College to Williamsport. The company is backed by about 30 years of commercial flooring experience. We can also tear out the old flooring first, so one company handles the slab and the finish on it. Estimates are free, and you can call or text (570) 772-2721.
Tell us about the job. We will get right back to you.
A walk down a finished coffee and black metallic epoxy floor in a long commercial room, the ceiling lights reflected in the gloss and the marbled pattern shifting with every step. The clip starts at the far end of the room and ends where the floor meets the next room.
The concrete steps and landing at this business entrance had old yellow and green paint peeling off them. We coated the steps and the landing in a gray flake system. The clip is our walk-around of the finished entry.
Before After A commercial floor takes more than foot traffic. Forklift wheels, pallet jacks, dropped tools and hot tires all land in the same lanes. Bare concrete starts to dust and stain, and the joints chip out.
An epoxy coating puts a hard surface over that slab, and liquids cannot soak into it. Oil, coolant and most cleaners sit on top until they get wiped up. The floor sweeps and mops clean, and a light color bounces the shop lights back into the room.
The system follows the room. Full broadcast flake systems add texture underfoot and hide the marks in an older slab. A smooth solid color reads cleaner down a warehouse aisle. Where floors get wet, a non-slip aggregate can go into the topcoat.
Three decades of commercial flooring work stand behind how we handle a slab. Coating failures usually trace back to prep, not to the product in the bucket. A power troweled slab has a slick top skin, and a coating stuck to that skin lifts later.
So we grind. Diamond grinding cuts through old paint, sealer, adhesive and that weak top layer. It opens the concrete so the coating can grip. We also look at moisture, because vapor moving up through a slab can push a coating loose from underneath.
Cracks and spalls get filled during prep. If tile, carpet or glued down vinyl is still down, we take it up first. The slab prep is part of the same job. One company stays responsible for the slab and the finish on it.
A coating needs a clear floor and time to cure. We look at the space and ask what has to move. Then we set an order of work that fits how the building runs.
Larger floors are often coated in sections, so the work moves through a building in stages. Cure windows depend on the product, the room temperature and the system on the floor. Foot traffic comes back before rolling loads do, and we give you those windows for your floor before we start.
Traffic lanes wear faster than the corners of a room. A maintenance recoat over a sound floor puts the wear layer back without rebuilding the whole system. That is planned work, and it is easier to schedule than a full redo. Business entrances get the same care outside: a flake coating on concrete entry steps and landings gives customers grip in wet weather.
From the first call or text to the final walkthrough of the finished work, here is how it goes.
Tell us what the floor is now and what you want on it. Call or text (570) 772-2721 and we will set a time to look at it.
We measure the space and look the slab over for cracks, old coatings and damp spots. Then you get a free estimate with the system and the color laid out.
Diamond grinding opens the concrete so the coating can grip it, and it takes off old paint, sealer and adhesive. Cracks and small spalls get filled before anything is coated.
The base coat rolls out over the prepped slab. On a flake floor the chips get broadcast into the wet base coat, then the loose flake gets scraped off.
A clear topcoat seals the floor and gives it the surface you walk on. Cure time moves with the temperature inside, and we go over the finished floor with you before we leave.
Common questions about commercial epoxy across Central Pennsylvania. If yours is not here, call or text and ask.
We grind concrete slabs back to a bare, open surface so coatings and new flooring bond. Old paint, glue and thinset come off, and the high spots come down.
Learn More
We tear out tile, carpet, hardwood, laminate and glued down vinyl. The debris goes with us and the floor is left ready for what comes next.
Learn More
A metallic epoxy floor gives a marbled, poured stone look to a finished room. We grind the slab, build the floor coat by coat, and tell you up front how it wears.
Learn MoreThree decades of commercial flooring work sit behind this company. That background sets how we prep a slab and pick the system for the floor in front of us.
We coat garages, basements, rec rooms and workshops in homes. We also handle shops, service bays, warehouses and back-of-house floors for businesses.
The old floor comes out, the slab gets ground and repaired, and the coating goes down. One company owns every step, from the tear-out through the final topcoat.
Estimates are free anywhere in our working area around Lock Haven. That reaches Clinton, Centre, Lycoming, Union, Northumberland, Snyder, Mifflin, Huntingdon and Montour counties.
Commercial epoxy flooring cost: 2026 guides put it at $3 to $15 per square foot installed. What moves the price in Central PA. Call or text (570) 772-2721.
Read more →
Epoxy vs polyaspartic floor coatings: cure speed, UV, temperature and cost compared. Free epoxy floor estimates in Central PA. Call or text (570) 772-2721.
Read more →Tell us the room, the size of the floor and what is on it now. Call or text (570) 772-2721, or send the details through the form and we will get back to you.
Tell us about the job. We will get right back to you.